DYNASAFE™

« back

Dynasafe™ - HF 05/A

HF 05/A

Mechanical load limiter which generates an “all or nothing” type signal in the event that a programmable target value is exceeded.

Available as versions with one threshold or two independent thresholds.
Load capacity from 100 lbsf to 6,400 lbsf.

Dynasafe™ - HF 05/B

HF 05/B

Mechanical load limiter with great response sensitivity, which generates an “all or nothing” type signal in the event that a programmable target value is exceeded. To be used in connection with monitor HF 85 to measure dynamic forces.

Load capacity from 100 lbsf to 6,400 lbsf.

Dynasafe™ - HF 31/1/A2

HF 31/1/A2

Mechanical load limiter for installation on steel cable. Generates an all or nothing type signal in the event that a programmable target value is exceeded.

Version with two independent thresholds.
Load capacity from 200 daN to 3200 daN at the wire.

Dynasafe™ - HF 32/0/A

HF 32/0/A

Mechanical load limiter for installation on the cable. Generates an "all or nothing" type signal in the event that a programmable target value is exceeded.

Version with one threshold or two independent thresholds.
Load capacity from 200 lbsf to 3140 lbsf per fall.

Technical data | User instructions

Top
Dynasafe™ - HF 32/1/A

HF 32/1/A

Mechanical load limiter for installation on the cable. Generates an "all or nothing" type signal in the event that a programmable target value is exceeded.

Version with one threshold or two independent thresholds.
Load capacity from 500 lbsf to 6000 lbsf per fall.

Technical data | User instructions

Dynasafe™ - HF 32/1/A2

HF 32/1/A2

Mechanical load limiter for installation on steel cable. Generates an “all or nothing” type signal in the event that a programmable target value is exceeded.

Version with two independent thresholds.
Load capacity from 250 daN to 3,000 daN at the wire.

User instructions

Dynasafe™ - HF 32/1/B

HF 32/1/B

Mechanical load limiter with great response sensitivity for installation on the cable. Generates an “all or nothing” type signal when a programmable target value is exceeded.
Version with one threshold.

To be used in connection with monitor HF 85 to measure dynamic forces.
Load capacity from 50 kg to 3,000 kg at the wire.

User instructions

Top
Dynasafe™ - HF 32/2/A

HF 32/2/A

Mechanical load limiter for installation on the cable. Generates an "all or nothing" type signal in the event that a programmable target value is exceeded.

Version with one threshold or two independent thresholds.
Load capacity from 300 daN to 6,000 daN per fall.

Technical data | User instructions

Dynasafe™ - HF 32/2/A2

HF 32/2/A2

Mechanical load limiter for installation on steel cable. Generates an “all or nothing” type signal in the event that a programmable target value is exceeded.

Version with two independent thresholds.
Load capacity from 300 daN to 6,000 daN at the wire.

User instructions

Dynasafe™ - HF 32/2/B

HF 32/2/B

Mechanical load limiter with great response sensitivity for installation on the cable. Generates an “all or nothing” type signal when a programmable target value is exceeded.
Version with one threshold.

To be used in connection with monitor HF 85 to measure dynamic forces.
Load capacity from 100 daN to 6,000 daN at the wire.

User instructions

Top
Dynasafe™ - HF 32/3/A

HF 32/3/A

Mechanical load limiter for installation on the cable. Generates an "all or nothing" type signal in the event that a programmable target value is exceeded.

Version with one threshold or two independent thresholds.
Load capacity from 1,000 daN to 12,000 daN per fall.

Technical data | User instructions

Dynasafe™ - HF 32/3/A2

HF 32/3/A2

Mechanical load limiter for installation on steel cable. Generates an “all or nothing” type signal in the event that a programmable target value is exceeded.

Version with two independent thresholds.
Load capacity from 1,000 daN to 12,000daN at the wire.

User instructions

Dynasafe™ - HF 32/3/B

HF 32/3/B

Mechanical load limiter with great response sensitivity for installation on the cable. Generates an “all or nothing” type signal when a programmable target value is exceeded.
Version with one threshold.

To be used in connection with monitor HF 85 to measure dynamic forces.
Load capacity from 250 kg to 12000 kg at the wire.

User instructions

Top
Dynasafe™ - HF 32/A

HF 32/A

Mechanical load limiter for installation on the cable. Generates a signal in the event that a programmable target value is exceeded.

Version with one threshold or two independent thresholds.
Load capacity from 550 lb to 26,000 lb per fall.

Dynasafe™ - HF 32/A2

HF 32/A2

Mechanical load limiter for installation on steel cable. Generates an “all or nothing” type signal in the event that a programmable target value is exceeded.

Version with two independent thresholds.
Load capacity from 300 lbsf to 12000 lbsf at the wire.

Dynasafe™ - HF 32/B

HF 32/B

Mechanical load limiter with great response sensitivity for installation on the cable. Generates an “all or nothing” type signal in the event that a programmable target value is exceeded.
Version with one threshold

Requires connection with monitor HF 85.
Load capacity from 100 lbsf to 6,400 lbsf at the wire.

Top