Safety ladders & rails - Page 2

 
Grid View List View
20 // 40 // 100

FABA Grip 150kg

The slider FABA Grip 150kg is conform to the latest applicable standard EN 353-1 and to the European Regulation 2016/425 and is certified for a user weighing up to 150kg. The slider is certified and compatible... 

FABA Klassik 150kg

We are introducing the new slider FABA Klassik 150kg. It is an upgrade to the actual FABA Klassik. This new version conforms to the latest applicable standard EN 353-1 and to the European Regulation 2016/425... 

FABA System A11

Introduced in 1965, the FABA A11 System is the precursor to the vertical access safety devices. The safety rail and slider designs are symmetrical. The slider can be inserted in either direction in the safety rail.  Rail... 

FABA System A12

The FABA A12 System has been on the market since 1995. It is a logical evolution of the FABA A11 System but a lighter and smaller version. The design of the safety rail and carriages is asymmetrical and guarantees... 

FABA System AL2

The FABA AL2 System has been on the market since 2000. It is based on the principle of the FABA A12 System and is suitable for material in anodised aluminum. The design of the safety rail and sliders is asymmetrical... 

FABA System AL2 MOBIL

The AL2 MOBIL Systems is a temporary solution. This solution is based on the "standard" AL2 system technology. For a minimum of 2 people and recommended for heights not greater than 12 metres. The FABA System... 

FABA System AL2 MOBIL-F

The AL2 MOBIL-F Systems is a temporary solution. This solution is based on the "standard" AL2 system technology. For a minimum of 2 people and recommended for heights not greater than 12 metres. The FABA System... 

Fiberglass ladders - Double sided stepladder Fiberglass

  • Ladder's 70-degree slope
  • Anti-slip rubber shoes
  • Application across industries such as chemical, off-shore, food, gas, and power plants

Fiberglass ladders - Double sided stepladder with deep steps Fiberglass

  • Step dimensions measuring 88 x 28 mm
  • Anti-Slip Steps and 25 cm Spacing Between Steps

Fiberglass ladders - Single ladder Fiberglass

  • Fibreglass ladders for chemical, offshore, food, gas and power plants
  • Step dimension of 28 x 28 mm
  • Uneven surface for improved foothold

Fiberglass ladders - Single step ladder with deep steps Fiberglass

  • Anti-slip steps with an uneven surface to prevent slips and falls
  • Step dimension of 28 x 28 mm

Installation on rectangular side bars

Bracket for the installation of FABA™ rail on the side profile (which must be rectangular) of an existing ladder. Brackets for anchoring FABA™ A12 fall arrest rails. Dimensions: 6 different models are available. Materials:... 

Installation on round side bars

Bracket for the installation of FABA™ rail on the side profile (which must be round) of an existing ladder. Brackets for anchoring FABA™ A12 fall arrest rails. Dimensions: 3 different models are available for a diameter... 

Joint connector

Joint connector between FABA™ A12 ladders or rails. Materials: Galvanised steel or stainless steel. Includes set of 2 FABA™ A12 screws.  

Ladder with release facility

The FABA™ ladder with release facility enables the comfortable insertion and retrieval of the FABA™ slider at the lower end of the ladder. The FABA™ ladder with release facility may only be installed as the lowermost segment... 

Mounting screws

FABA T-bolt kit made specifically for fixing the FABA™ A12 rail to the different brackets. Each kit includes 1 screw with nut and washer. Lengths of M12 x 35 mm, x 50 mm and x 65 mm. Materials: Stainless steel.  

Resting platform for ladder

The resting platforms are placed every 12 m or dependent on the building and local standard or law The device can be folded down to ease passage and has two platforms, each 130 x 300 mm For FABA A12 ladder systems. Distance... 

Resting platform for rail

Resting plaftorm for rails : For manhole steps in which the FABA™ climbing protection rail has been centrally mounted on the step irons. Distance between step irons min. 333 mm. For distances between the step irons of... 

Sign plate

The sign plate is mandatory comonent of any fall protection system. It must be installed near the access of the system. It includes the installation reference, the compatible sliders and the year of installation. Material:... 

Square tube bracket

The square tube bracket is designed for installation of the FABA™ ladder to a masonry structure. Available with holes for wall fixing: Ø = 10.5 mm and Ø = 14 mm. Supplied with 1x screw kit M12 x 35mm. Fixing anchors... 

Previous page icon

Showing 21 - 40 of 45

Next page icon
Compare as many products as you like to help you make the right decision