Travspring® – Horizontal lifeline system

TRAVSPRING^® – HORIZONTAL LIFELINE SYSTEM

The Travspring^® is a horizontal lifeline system that is easy to install and can allow up to three users for multiple span and two users for single span systems. These systems can be permanent or temporary and no special tools are required to install. Every user must wear shock absorbing lanyard with maximum arrest force of 900 lb. (4 kN).

It comes with a visual tension indicator and a new in-line energy absorber. This is a proximity horizontal lifeline system meaning that the user must wear a double lanyard harness to leap-frog over corner anchors and manipulate the O-ring through intermediate anchors in order to traverse the length of the lifeline.

As with all fall protection systems, a professional engineer or a qualified person must certify the design and installation of the lifeline. The system can be mounted on a wall or on the ground. It must not be used as an overhead system.

When a fall occurs, the energy absorber deploys or un-winds acting as the visual indicator that something has happened.

BENEFITS

• The Travspring^® system can be permanently or temporarily installed. The system can be portable.
• The system length is unlimited and it can go around corners
• Maximum spacing between anchor points is 50 ft. (15 m)
• Up to three users on one system
• Easy to install with common tools

FEATURES

• Can be used for fall arrest or fall restraint
• Components are made of stainless steel and non corrosive materials with the option of ordering galvanized wire rope
• Lightweight components
• Comes with a tension indicator and tensioner
• Sold as individual components
• Visual impact indicator (energy absorber un-winds)
• Utilizes inexpensive connectors
• Cooper aluminum anchors prevent fusing of the wire rope
• No need to dismantle the entire system in the event of a fall.
• Individual components can be replaced

APPLICATIONS

• Construction sites
• Steel erection
• Pipe racks
• Concrete structures
• Roof work
• Manufacturing plants

APPLICABLE STANDARDS

• OSHA 1910, subpart D: Walking and working surfaces
• OSHA 1926, subpart M: Fall protection
• ANSI Z359.6-2016: Specifications and design requirements for active fall protection systems
• ANSI A10.32-2012: Personal fall protection used in construction and demolition operations
• CSA Z259.16-21: Design of active fall protection systems

Must be designed by a qualified person, professional engineer, as part of a complete personal fall arrest system. It can then be installed by any user.